Panther

  • The Panther is a high-performance board built for speed and control. Its foiled shape, with a fuller nose, adds stability on landings, while the sharp edge around the tail curve delivers crisp responsiveness through every turn. Designed to let you push your limits, the Panther strikes the perfect balance between agility and stability. A slight single concave bottom enhances lift and drive, while the medium rocker ensures fast acceleration and a lively feel underfoot. Versatile by design, the Panther comes in multiple tail shapes—squash, round, or swallow—so you can dial in the perfect setup.

    Wave Type - 3-6ft

    Board Feel - Fast and agile

    Skill Level - Intermediate to Advanced

  • The Panther is hand shaped, PU/PE Polyurethane foam blank with a plywood stringer and glassed with Polyester resin.

    We also add fiberglass reinforcement patches over the fin boxes to increase the strength of the fin.

  • 5'6 18.44 2.22 24.21

    5'7 18.50 2.25 25

    5'8 18.63 2.29 25.99

    5'9 18.75 2.32 26.91

    5'10 18.88 2.38 28.61

    5'11 19 2.44 29.47

    6'0 19.13 2.50 30.85

    6'1 19.25 2.57 32.33

    6'2 19.38 2.63 33.76

    6'3 19.50 2.69 35.22

    6'4 19.63 2.75 36.96

    6'6 19.99 2.83 39.30

  • Boards take take around 4 weeks to make depending upon the season.

Terrahawk

  • The Terrahawk is a great all-round board for those that want a little more foam up front. It paddles well and turns on a dime. The step-wing in the tail breaks water-flow off the rail, which helps with maneuverability and helps give more hold. Goes best in 2-5 foot waves, depending upon surfer’s ability.

    Wave Type - 2-5ft

    Board Feel - Fast and fun

    Skill Level - Intermediate to Advanced

  • The Panther is hand shaped, PU/PE Polyurethane foam blank with a plywood stringer and glassed with Polyester resin.

    We also add fiberglass reinforcement patches over the fin boxes to increase the strength of the fin.

  • 5’6 - 19 2 5/16 Vol 26L

    5’7 - 19 ¼ 2 3/8 Vol 27.4L

    5’8 - 19 ½ 2 7/16 Vol 28.9L

    5’9 - 19 3/42 ½ Vol 30.5L

    5’10 - 20 2 9/16 Vol 32.1L

    5’11 - 20 3/8 2 5/8 Vol 33.9L

    6’0 - 20 5/8 2 5/8 Vol 34.9L

    6’1 - 21 2 ¾ Vol 37.6L

    6’2 - 21 ¼ 2 ¾ 38.6L

  • Boards take take around 4 weeks to make depending upon the season.

Wave Warrior

  • The Wave Warrior is designed to make surfing easy and fun. This is a perfect all-round board and one of our most popular models. Goes best in 2-6 foot waves, depending upon surfer’s ability.

    Wave Type - 2-5ft

    Board Feel - Fast and fun

    Skill Level - Intermediate to Advanced

  • The Panther is hand shaped, PU/PE Polyurethane foam blank with a plywood stringer and glassed with Polyester resin.

    We also add fiberglass reinforcement patches over the fin boxes to increase the strength of the fin.

  • 5'4 - "19.5"2.25"26.1L

    5'6 - "19.75"2.4"28.6L

    5'7 - "19.9"2.45"29.81L

    5'8 - "20"2.5"31.1L

    5'9 - "20.15"2.6"32.3L

    5'10 - "20.25"2.6"33.8L

    5'11 - "20.4"2.7"35.6L

    6'0 - "20.5"2.75"36.6L

    6'2 - "20.75"2.75"38.4L

    6'4 - "21"3"43.2L

    6'6 - "21.5"3"45.5L

    6'8 - "22"3.25"51.5L

    6'10 - "22.5"3.25"54L

  • Boards take take around 4 weeks to make depending upon the season.

Rad Fish

  • The Rad Fish is a modern twin fin designed for speed. Inspired by the original fish but updated for today’s performance needs, it maintains the classic fish traits of speed and float, combining a full rail and outline with a single to double concave bottom with a vee off the tail for enhanced skate-like flow and vertical performance.
    A versatile board that blends smooth rides with sharp, dynamic turns, the Rad Fish should be a staple in every surfer's quiver.

    Wave Type - 2-5ft

    Board Feel - Fast and fun

    Skill Level - Intermediate to Advanced

  • The Rad Fish is hand shaped, PU/PE Polyurethane foam blank with a plywood stringer and glassed with Polyester resin.

    We also add fiberglass reinforcement patches over the fin boxes to increase the strength of the fin.

  • 5’4 x 20 1/2 x 2 3/8 Vol 29 L

    5’6 x 20 1/2 x 2 7/16 Vol 31 L

    5’8 x 20 7/8 x 2 1/2 Vol 33 L

    5’9 x 21 x 2 9/16 Vol 34 L

    5’10 x 21 1/4 x 2 5/8 Vol 36 L

    5’11 x 21 3/8 x 2 11/16 Vol 38 L

    6’0 x 21 5/8 x 2 3/4 Vol 40 L

    6’1 x 21 7/8 x 2 13/16 Vol 42 L

    6’2 x 22 x 2 7/8 Vol 43.5 L

  • Boards take take around 4 weeks to make depending upon the season.

Easy Rider 2.0

  • The Easy Rider 2.0 is more refined than its predecessor, we have thinned out the nose and pulled in the tail so that its lighter in weight and has more manoeuvrability offering tones of surface glide and speed down the line. As the name suggests this board is not only super easy to ride but it’s all round just far easy to manage. Basically this is as user friendly as a surfboard gets, all the stability and paddle power of a bigger board but without the cumbersome size and weight. It’s easy to move around in the line-up and fits in your car so you don't need to worry about roof racks. If you are looking to progress from a soft top or looking for the perfect entry level board then the ER 2.0 is the go! For the more advanced you can go super short for a great skatey summer board.

    Wave Type - 2-3ft

    Board Feel - Fast and fun

    Skill Level - Learner to Advanced

  • The Easy Rider is hand shaped, PU/PE Polyurethane foam blank with a plywood stringer and glassed with Polyester resin.

    We also add fiberglass reinforcement patches over the fin boxes to increase the strength of the fin.

  • 5’6 x 20 x 2 7/16 Vol 31L

    5’8 x 20 1/2 x 2 1/2 Vol 33 L

    5’9 x 20 3/4 x 2 12 Vol 35 L

    5’10 x 21 x 2 9/16 Vol 36.5 L

    5’11 x 21 1/2 x 2 5/8 Vol 36.5 L

    6’0 x 21 1/2 x 2 5/8 Vol 38 L

    6’2 x 22 x 2 11/16 Vol 41 L

    6’4 x 22 1/4 x 2 11/16 Vol 43.5 L

    6’6 x 22 1/4 x 2 3/4 Vol 46 L

  • Boards take take around 4 weeks to make depending upon the season.

The Mid

  • The Mid is a user-friendly mid-length surfboard that thrives in diverse conditions. With its wider outline, wide nose, and low rocker, combined with thin rails, this board offers impressive paddle power and surprising agility. Whether you're cruising or carving, it excels in speed and maneuverability, effortlessly tipping on rail for smooth, fast turns.

    Ideal for surfers of all levels, the Mid is particularly favoured by intermediates seeking to refine their skills in various wave sizes. Available in matt and gloss.

    Wave Type - 2-5ft

    Board Feel - Fast and fun

    Skill Level - Learner to Advanced

  • The Mid is made with a plywood stringer, a PU/PE Polyurethane foam blank and glassed with Polyester resin.

  • 6’6 x 20 1/4 x 2 5/8 36 L

    6'8 x 20 3/4 x 2 5/8 Vol 38 L

    6’8 x 21 x 2 3/4 Vol 40.5 L

    7’0 x 21 1/4 x 2 3/4 Vol 44 L

    7’0 x 21 3/4 x 2 3/4 Vol 45 L

    7’6 x 21 3/4 x 2 7/8 50 L

  • Boards take take around 4 weeks to make depending upon the season.

BFG

  • The BFG is built for lift, trim speed, and smooth turning. Its blended concave ensures controlled nose rides, while the slightly pulled-in nose fits well in the pocket. A gradual outline curve and turned-up tail rails offer loose, smooth turns and better nose ride control. The slight bottom roll and flatter rocker enhance transitions and trim. Ideal for a range of conditions, the BFG shines on points and mellow beach breaks.

    Wave Type - 1-5ft

    Board Feel - Glide and flow

    Skill Level - Learner to Advanced

  • The BFG is made with a 5mm cedar stringer, a PU/PE Polyurethane foam blank and glassed with Polyester resin.

    Standard 6 oz bottom 4 + 6 oz deck 
    Medium 6 oz bottom 6 + 6 oz deck
    Heavier 7.5 oz bottom 6 + 6 oz deck

  • 9’2 x 22 1/2 x 2 3/4 Vol 65

    9’6 x 23 x 2 7/8 Vol 72 L

    Rocker

    A flatter deck line gives allows for a perfect distribution of volume throughout the length of the board. With moderate curve through from nose to tail and increase tail flip starting a third up running back. The deck line is ‘scooped’ to match the bottom tail rocker providing increased sensitivity and locking the tail in for extended tip time.

    Bottom Contour

    Shorter rail to rail concave blending into a relaxed rolled belly progressively changing into a hard V trough the tail.

    Rails

    Mid 50/50 rolled from the bottom. From fin box back the bottom rail is blocked giving a hard edge 1” in from the rail for release and carving turns.

  • Boards take take around 4 weeks to make depending upon the season.